Send Message
Home News

What is CASS Test?

Certification
China Dongguan Quality Control Technology Co., Ltd. certification
China Dongguan Quality Control Technology Co., Ltd. certification
Customer Reviews
The touch screen micro vickers hardness tester has been installed a few weeks ago, everything is OK. Thanks for your advice and excellent service.

—— Mr. David Chambers

Thanks for the fast delivery and our customer is very satisfied for the rockwell hardness tester, and hope more orders soon.

—— Neil Renato

After we visited the customer, they finally decided to purchase Brinell hardness tester iBrin-413Z, now we have installed the unit at customer’s site,

—— Fermin Lee

Thank you for the indenters (diamond  cone 120 degrees). We recently got it and already tested it. Indenters  are good as we expected. 

—— Dalius Skinulis

The Measurements are good for Brinell Tester HBST-3000.

—— Sun Chull Kim

Hey, the hardness tester iVick-484ST was installed last week and works well, thanks for the professional support.

—— Sabinian Smith

I am glad to inform you that the installation of the SHB-3000C Brinell hardness tester has been finished successfully. I would like to thank you!

—— Robbin

I'm Online Chat Now
Company News
What is CASS Test?
Latest company news about What is CASS Test?

 

Copper-accelerated acetic acid-salt spray (CASS) testing used to evaluating the corrosive performance of decorative copper/nickel/chromium or nickel/chromium coatings on steel, zinc alloys, aluminum alloys, and plastics designed for severe service. It is also applicable to the testing of anodized aluminum.

 

The suitability of this test and correlation of results with service experience should be determined before it is specified for coating systems or materials other than those mentioned in this paragraph.

 

Solution: dissolving 5 parts by weight of salt in 95 parts of water conforming to Specification D 1193, the salt shall be sodium chloride (NaCl), ACS reagent grade, or equivalent.

 

The pH of this solution shall be between 6.0 and 7.0. Impurities or contam-ination of either the salt or the water, or both, should be suspected if the pH is outside of this range.

 

Add 0.25g of reagent grade copper chloride (CuCl2·2H2O) to each liter of the salt solution; dissolve and mix thoroughly.

 

The pH of the salt-copper solution shall be adjusted to the range of 3.1 to 3.3, as measured on a sample of the collected spray, by the addition of glacial acetic acid, ACS reagent grade, or equivalent. The pH measurement shall be made electrometrically at 25°C. Before the solution is atomized, it shall be free of suspended solids.

 

 

Pub Time : 2017-04-28 16:16:44 >> News list
Contact Details
Dongguan Quality Control Technology Co., Ltd.

Contact Person: Mr. Raymond Chung

Tel: 86-13711988687

Fax: 86-769-22784276

Send your inquiry directly to us (0 / 3000)